|
Need
a quote for us to supply and install?
Save
yourself some time, by...
a.
Measuring the length of area to be fenced
b.
Deciding the total height required
c.
Choosing the style (samples
on show at our yard)
d.
Checking for hidden obstructions (tree stumps, drains
etc)
For
supply only
simply contact us with the style and sizes and we
will do the rest.
Or
if you fancy a bit of DIY Fencing?
The
tools that you should have...
Graft
clutch
shovel
spade
tape
measure
string
line
spirit
level
hammer
& nails
wheelbarrow
Possible
additional tools required (depending on circumstances) Kango
(concrete breaker) Disc cutter
(with diamond cutting disc), Saw.
|
Helpful
Hints from Acorn Fencing on DIY installation of our standard
close board fencing, concrete posts & gravel boards
A)
Dig hole for first post
B)
Place post in hole, fill with post mix
C)
Check post is straight
D)
Tie string line between first post and finish point
E)
Mark position for second post
(Allowing for thickness of
post)
F) Dig second hole
G)
Place gravel board on ground, slide into slot in first post
H)
Check gravel board is horizontal
(Also, check second hole
position)
I)
Place fence panel on gravel board, slide in to slot in first
post
J)
Place second post in hole, make sure the panel & gravel
board
locate in slot in second
post
K)
Check & adjust second post (level & straight on
string)
L)
Fill hole with post mix
Repeat
as necessary.
If
all this sounds a bit too daunting, you could always call us
and enquire about our installation service, for which
quotations are available.
|
